jaxstate
Aug 4, 09:53 AM
LOL. You win post of the day.
Give me a break. People voted negative on this because they are waiting on merom MBPs and now think that, contrary to they're hopes and prayers the past few weeks, that the Merom MBP revisions wont be out until september. This is no clandestine PC-clone smear campaign. who's it going to effect? This forum is full of the faithful, messing around here isn't going to change national opinion of Microsoft or apple products. It's not Steve Ballmer twisting his handlebar mustaches as he chortles to himself, going from one article to the next, voting negative at each. Let's get real here.
Give me a break. People voted negative on this because they are waiting on merom MBPs and now think that, contrary to they're hopes and prayers the past few weeks, that the Merom MBP revisions wont be out until september. This is no clandestine PC-clone smear campaign. who's it going to effect? This forum is full of the faithful, messing around here isn't going to change national opinion of Microsoft or apple products. It's not Steve Ballmer twisting his handlebar mustaches as he chortles to himself, going from one article to the next, voting negative at each. Let's get real here.
SLCentral
Aug 2, 01:30 PM
Wow, I have a 30" monitor and I would not mind to have a 40" + monitor.:eek:
Seriously, I have dual monitors and I think a larger monitor would be welcome. Not maybe for dual monitor set up because it would be too large, but for a single large monitor, it would be great. Plus the use for entertainment display to watch movies and TV would be really cool.
The technology is here. I really expect Apple to come up something bigger for the Pro crowd and WWDC is the perfect event for that. Remember, people never thought the 30" would ever come up.
Regarding the design, I agree that Apple will keep the same enclosure. Is a very nice design and I don't think will change anytime soon.
As for Isight built in, I like the idea, but if you have dual monitors, seems weird to have dual Isight. I rather have the BTO option for an extra price.
I know that everyone thought 30" would be too big before they were released, but still, 40" for a desktop screen? That's bigger then most TV's. Think about cost as well. 42" LCD's (not plasmas) run at least $3K, and are usually 1366x768. There's likely a few 1080p screens, which would be probably around $5K. Considering the 30" is 2560x1600, we're looking at something around 4000x2500 (or whatever the ratio is). That would be WAY too expensive to ever be feasible to anyone except for a SMALL percentage of people/companies.
Seriously, I have dual monitors and I think a larger monitor would be welcome. Not maybe for dual monitor set up because it would be too large, but for a single large monitor, it would be great. Plus the use for entertainment display to watch movies and TV would be really cool.
The technology is here. I really expect Apple to come up something bigger for the Pro crowd and WWDC is the perfect event for that. Remember, people never thought the 30" would ever come up.
Regarding the design, I agree that Apple will keep the same enclosure. Is a very nice design and I don't think will change anytime soon.
As for Isight built in, I like the idea, but if you have dual monitors, seems weird to have dual Isight. I rather have the BTO option for an extra price.
I know that everyone thought 30" would be too big before they were released, but still, 40" for a desktop screen? That's bigger then most TV's. Think about cost as well. 42" LCD's (not plasmas) run at least $3K, and are usually 1366x768. There's likely a few 1080p screens, which would be probably around $5K. Considering the 30" is 2560x1600, we're looking at something around 4000x2500 (or whatever the ratio is). That would be WAY too expensive to ever be feasible to anyone except for a SMALL percentage of people/companies.
Derekasaurus
Aug 4, 12:19 AM
are people not expecting merom to go immediately into the macbook as well? i don't see a reason for apple to purposely gimp their best-selling notebook when a merom chip is supposed to cost the same as its yonah counterpart.
Right now there is a big price difference between the MB and MBP line but not a whole lot of difference in performance. Putting the Core 2 in the MBP would help differentiate it from the MB. That doesn't mean the MB won't get a speed bump (the Core Duo goes up to 2.33GHz), but Apple might delay putting Merom in the MB to differentiate the lines. I'd pounce on a Merom MB, but I don't think it's going to happen in conjunction with the Merom MBP.
Right now there is a big price difference between the MB and MBP line but not a whole lot of difference in performance. Putting the Core 2 in the MBP would help differentiate it from the MB. That doesn't mean the MB won't get a speed bump (the Core Duo goes up to 2.33GHz), but Apple might delay putting Merom in the MB to differentiate the lines. I'd pounce on a Merom MB, but I don't think it's going to happen in conjunction with the Merom MBP.
CalBoy
May 3, 03:39 PM
I see no reason why 99, 99.5, and 100 are easier to track than 37.2, 37.5, and 37.7. As you said, we accept body temp to be 98.6 and 37.0 in Celsius. If decimals are difficult to remember, then clearly we should pick the scale that represents normal body temp as an integer, right? ;)
It doesn't matter what normal body temperature is because that's not what people are looking for when they take a temperature; they're looking for what's not normal. If it can be helped, the number one is seeking should be as flat as possible.
There is a distinctive quality about 100 that is special. It represents an additional place value and is a line of demarcation for most people. For a scientist or professional, the numbers seem the same (each with 3 digits ending in the tenths place), but to the lay user they are very different. The average person doesn't know what significant digits are or when rounding is appropriate. It's far more likely that someone will falsely remember "37.2" as "37" than they will "99" as "98.6." Even if they do make an error and think of 98.6 as 99, it is an error on the side of caution (because presumably they will take their child to the doctor or at least call in).
I realize this makes me seem like I put people in low regard, but the fact is that most things designed for common use are meant to be idiot-proof. Redundancies and warnings are hard to miss in such designs, and on a temperature scale, one that makes 100 "dangerous" is very practical and effective. You have to keep in mind that this scale is going to be used by the illiterate, functionally illiterate, the negligent, the careless, the sloppy, and the hurried.
The importance of additional digits finds its way into many facets of life, including advertising and pricing. It essentially the only reason why everything is sold at intervals of "xx.99" instead of a flat price point. Marketers have long determined that if they were to round up to the nearest whole number, it would make the price seem disproportionately larger. The same "trick" is being used by the Fahrenheit scale; the presence of the additional digit makes people more alarmed at the appropriate time.
Perhaps your set of measuring cups is the additional piece of equipment. Indeed you wouldn't need them. For a recipe in SI, the only items you would need are an electronic balance, graduating measuring "cup," and a graduated cylinder. No series of cups or spoons required (although, they do of course come in metric for those so inclined).
Of course any amateur baker has at least a few cups of both wet and dry so they can keep ingredients separated but measured when they need to be added in a precise order. It just isn't practical to bake with 3 measuring devices and a scale (which, let's be real here, would cost 5 times as much as a set of measuring cups).
This also relies on having recipes with written weights as opposed to volumes. It would also be problematic because you'd make people relearn common measurements for the metric beaker because they couldn't have their cups (ie I know 1 egg is half a cup, so it's easy to put half an egg in a recipe-I would have to do milimeter devision to figure this out for a metric recipe even though there's a perfectly good standard device for it).
It might seem that way to you, but the majority of the world uses weight to measure dry ingredients. For them it's just as easy.
Sure when you have a commercial quantity (which is also how companies bake in bulk-by weight), but not when you're making a dozen muffins or cupcakes. The smaller the quantity, the worse off you are with weighing each ingredient in terms of efficiency.
Why would you need alternative names? A recipe would call for "30ml" of any given liquid. There's no need to call it anything else.
So what would you call 500ml of beer at a bar? Would everyone refer to the spoon at the dinner table as "the 30?" The naming convention isn't going to disappear just because measurements are given in metric. Or are you saying that the naming convention should disappear and numbers used exclusively in their stead?
Well, no one would ask for a 237ml vessel because that's an arbitrary number based on a different system of units. But if you wanted, yes, you could measure that amount in a graduated measuring cup (or weigh it on your balance).
In that case, what would I call 1 cup of a drink? Even if it is made flat at 200, 250, or 300ml, what would be the name? I think by and large it would still be called a cup. In that case you aren't really accomplishing much because people are going to refer to it as they will and the metric quantity wouldn't really do anything because it's not something that people usually divide or multiply by 10 very often in daily life.
I suspect people would call it a "quarter liter," much like I would say "quarter gallon."
No, that would be 1/4 of a liter, not 4 liters. I'm assuming that without gallons, the most closely analogous metric quantity would be 4 liters. What would be the marketing term for this? The shorthand name that would allow people to express a quantity without referring to another number?
And no, you wouldn't call 500ml a "pint" because, well, why would you? :confused:
Well I'm assuming that beer would have to be served in metric quantities, and a pint is known the world over as a beer. You can't really expect the name to go out of use just because the quantity has changed by a factor of about 25ml.
...But countries using SI do call 500ml a demi-liter ("demi" meaning "half").
Somehow I don't see that becoming popular pub lingo...
This is the case with Si units as well. 500, 250, 125, 75, etc. Though SI units can also be divided by any number you wish. Want to make 1/5 of the recipe? ...Just divide all the numbers by five.
Except you can't divide the servings people usually take for themselves very easily by 2, 4, 8, or 16. An eighth of 300ml (a hypothetical metric cup), for example, is a decimal. It's not very probable that if someone was to describe how much cream they added to their coffee they'd describe it as "37.5ml." It's more likely that they'll say "1/4 of x" or "2 of y." This is how the standard system was born; people took everyday quantities (often times as random as fists, feet, and gulps) and over time standardized them.
Every standard unit conforms to a value we are likely to see to this day (a man's foot is still about 12 inches, a tablespoon is about one bite, etc). Granted it's not scientific, but it's not meant to be. It's meant to be practical to describe everyday units, much like "lion" is not the full scientific name for panthera leo. One naming scheme makes sense for one application and another makes sense for a very different application. I whole heartedly agree that for scientific, industrial, and official uses metric is the way to go, but it is not the way to go for lay people. People are not scientists. They should use the measuring schemes that are practical for the things in their lives.
Not that OS X Panthera Leo doesn't have a nice ring to it, of course. ;)
No, but it is onerous for kids to learn SI units, which is a mandatory skill in this global world. Like I said, why teach kids two units of measure if one will suffice?
It's onerous to learn how to multiply and divide by 10 + 3 root words? :confused: Besides, so many things in our daily lives have both unit scales. My ruler has inches and cm and mm. Bathroom scales have pounds and kg. Even measuring cups have ml written on them.
You could be right for international commerce where values have to be recalculated just for the US, but like I said, I think those things should be converted. I don't really care if I buy a 25 gram candy bar as opposed to a 1 ounce candy bar or a 350ml can of soda.
Perhaps true, but just because you switch to metric, doesn't mean you need to stop using tablespoons and teaspoons for measurements. It's all an approximation anyway, since there are far more than 2 different spoon sizes, and many of them look like they're pretty much equal in size to a tablespoon.
I'm sorry, but which tablespoons do you use that aren't tablespoons? The measuring spoons most people have at home for baking are very precise and have the fractions clearly marked on them.
Other than that, there's a teaspoon, tablespoon, and serving spoon (which you wouldn't use as a measurement). The sizes are very different for each of those and I don't think anyone who saw them side by side could confuse them.
So if you're cooking, do what everyone else does with their spoons; if you need a tablespoon, grab the big-ish one and estimate. If you needed more precision than that, why wouldn't you use ml? :confused:
Because it's a heck of a lot easier to think, "I need one xspoon of secret ingredient" than it is to think, "I need xml of secret ingredient." You think like a scientist (because you are one). Most people aren't. That's who the teaspoons and tablespoons are for.
It doesn't matter what normal body temperature is because that's not what people are looking for when they take a temperature; they're looking for what's not normal. If it can be helped, the number one is seeking should be as flat as possible.
There is a distinctive quality about 100 that is special. It represents an additional place value and is a line of demarcation for most people. For a scientist or professional, the numbers seem the same (each with 3 digits ending in the tenths place), but to the lay user they are very different. The average person doesn't know what significant digits are or when rounding is appropriate. It's far more likely that someone will falsely remember "37.2" as "37" than they will "99" as "98.6." Even if they do make an error and think of 98.6 as 99, it is an error on the side of caution (because presumably they will take their child to the doctor or at least call in).
I realize this makes me seem like I put people in low regard, but the fact is that most things designed for common use are meant to be idiot-proof. Redundancies and warnings are hard to miss in such designs, and on a temperature scale, one that makes 100 "dangerous" is very practical and effective. You have to keep in mind that this scale is going to be used by the illiterate, functionally illiterate, the negligent, the careless, the sloppy, and the hurried.
The importance of additional digits finds its way into many facets of life, including advertising and pricing. It essentially the only reason why everything is sold at intervals of "xx.99" instead of a flat price point. Marketers have long determined that if they were to round up to the nearest whole number, it would make the price seem disproportionately larger. The same "trick" is being used by the Fahrenheit scale; the presence of the additional digit makes people more alarmed at the appropriate time.
Perhaps your set of measuring cups is the additional piece of equipment. Indeed you wouldn't need them. For a recipe in SI, the only items you would need are an electronic balance, graduating measuring "cup," and a graduated cylinder. No series of cups or spoons required (although, they do of course come in metric for those so inclined).
Of course any amateur baker has at least a few cups of both wet and dry so they can keep ingredients separated but measured when they need to be added in a precise order. It just isn't practical to bake with 3 measuring devices and a scale (which, let's be real here, would cost 5 times as much as a set of measuring cups).
This also relies on having recipes with written weights as opposed to volumes. It would also be problematic because you'd make people relearn common measurements for the metric beaker because they couldn't have their cups (ie I know 1 egg is half a cup, so it's easy to put half an egg in a recipe-I would have to do milimeter devision to figure this out for a metric recipe even though there's a perfectly good standard device for it).
It might seem that way to you, but the majority of the world uses weight to measure dry ingredients. For them it's just as easy.
Sure when you have a commercial quantity (which is also how companies bake in bulk-by weight), but not when you're making a dozen muffins or cupcakes. The smaller the quantity, the worse off you are with weighing each ingredient in terms of efficiency.
Why would you need alternative names? A recipe would call for "30ml" of any given liquid. There's no need to call it anything else.
So what would you call 500ml of beer at a bar? Would everyone refer to the spoon at the dinner table as "the 30?" The naming convention isn't going to disappear just because measurements are given in metric. Or are you saying that the naming convention should disappear and numbers used exclusively in their stead?
Well, no one would ask for a 237ml vessel because that's an arbitrary number based on a different system of units. But if you wanted, yes, you could measure that amount in a graduated measuring cup (or weigh it on your balance).
In that case, what would I call 1 cup of a drink? Even if it is made flat at 200, 250, or 300ml, what would be the name? I think by and large it would still be called a cup. In that case you aren't really accomplishing much because people are going to refer to it as they will and the metric quantity wouldn't really do anything because it's not something that people usually divide or multiply by 10 very often in daily life.
I suspect people would call it a "quarter liter," much like I would say "quarter gallon."
No, that would be 1/4 of a liter, not 4 liters. I'm assuming that without gallons, the most closely analogous metric quantity would be 4 liters. What would be the marketing term for this? The shorthand name that would allow people to express a quantity without referring to another number?
And no, you wouldn't call 500ml a "pint" because, well, why would you? :confused:
Well I'm assuming that beer would have to be served in metric quantities, and a pint is known the world over as a beer. You can't really expect the name to go out of use just because the quantity has changed by a factor of about 25ml.
...But countries using SI do call 500ml a demi-liter ("demi" meaning "half").
Somehow I don't see that becoming popular pub lingo...
This is the case with Si units as well. 500, 250, 125, 75, etc. Though SI units can also be divided by any number you wish. Want to make 1/5 of the recipe? ...Just divide all the numbers by five.
Except you can't divide the servings people usually take for themselves very easily by 2, 4, 8, or 16. An eighth of 300ml (a hypothetical metric cup), for example, is a decimal. It's not very probable that if someone was to describe how much cream they added to their coffee they'd describe it as "37.5ml." It's more likely that they'll say "1/4 of x" or "2 of y." This is how the standard system was born; people took everyday quantities (often times as random as fists, feet, and gulps) and over time standardized them.
Every standard unit conforms to a value we are likely to see to this day (a man's foot is still about 12 inches, a tablespoon is about one bite, etc). Granted it's not scientific, but it's not meant to be. It's meant to be practical to describe everyday units, much like "lion" is not the full scientific name for panthera leo. One naming scheme makes sense for one application and another makes sense for a very different application. I whole heartedly agree that for scientific, industrial, and official uses metric is the way to go, but it is not the way to go for lay people. People are not scientists. They should use the measuring schemes that are practical for the things in their lives.
Not that OS X Panthera Leo doesn't have a nice ring to it, of course. ;)
No, but it is onerous for kids to learn SI units, which is a mandatory skill in this global world. Like I said, why teach kids two units of measure if one will suffice?
It's onerous to learn how to multiply and divide by 10 + 3 root words? :confused: Besides, so many things in our daily lives have both unit scales. My ruler has inches and cm and mm. Bathroom scales have pounds and kg. Even measuring cups have ml written on them.
You could be right for international commerce where values have to be recalculated just for the US, but like I said, I think those things should be converted. I don't really care if I buy a 25 gram candy bar as opposed to a 1 ounce candy bar or a 350ml can of soda.
Perhaps true, but just because you switch to metric, doesn't mean you need to stop using tablespoons and teaspoons for measurements. It's all an approximation anyway, since there are far more than 2 different spoon sizes, and many of them look like they're pretty much equal in size to a tablespoon.
I'm sorry, but which tablespoons do you use that aren't tablespoons? The measuring spoons most people have at home for baking are very precise and have the fractions clearly marked on them.
Other than that, there's a teaspoon, tablespoon, and serving spoon (which you wouldn't use as a measurement). The sizes are very different for each of those and I don't think anyone who saw them side by side could confuse them.
So if you're cooking, do what everyone else does with their spoons; if you need a tablespoon, grab the big-ish one and estimate. If you needed more precision than that, why wouldn't you use ml? :confused:
Because it's a heck of a lot easier to think, "I need one xspoon of secret ingredient" than it is to think, "I need xml of secret ingredient." You think like a scientist (because you are one). Most people aren't. That's who the teaspoons and tablespoons are for.
rdowns
Apr 14, 04:29 PM
Repeating myself ...
I find this approach highly irrational. If you're overweight, it's important to lose fat. It does no good whatsoever to treat brain the same as fat ... to treat vital organs the same as fat ... to treat limbs and digits the same as fat.
I think we can all agree that there is a lot of waste in government. The fact is, a lot of it is hard to find. At this point in our financial situation, I agree with across the board cuts. After that, then you continue to cut, where it makes sense, surgically.
The Democrats agreed to historic spending cuts. Where are the Republicans who agree to tax increases?
That's crap and you know it.
According to a Congressional Budget Office comparison, the bill would produce only $350 million in tangible savings this year, partly because cuts in domestic programs were offset by an increase of about $5 billion for Pentagon programs.
When projected emergency contingency spending overseas is figured in by the budget office, estimated outlays for this year actually increase by over $3 billion.
The agreement does put the brakes on what had been a steady growth in spending by federal agencies. Future savings would be greater as the cuts took hold — a point Republican aides emphasized by noting that the plan is estimated to cut spending by $312 billion over the next decade.
Link (http://www.nytimes.com/2011/04/14/us/politics/14congress.html?_r=2&hp)
I find this approach highly irrational. If you're overweight, it's important to lose fat. It does no good whatsoever to treat brain the same as fat ... to treat vital organs the same as fat ... to treat limbs and digits the same as fat.
I think we can all agree that there is a lot of waste in government. The fact is, a lot of it is hard to find. At this point in our financial situation, I agree with across the board cuts. After that, then you continue to cut, where it makes sense, surgically.
The Democrats agreed to historic spending cuts. Where are the Republicans who agree to tax increases?
That's crap and you know it.
According to a Congressional Budget Office comparison, the bill would produce only $350 million in tangible savings this year, partly because cuts in domestic programs were offset by an increase of about $5 billion for Pentagon programs.
When projected emergency contingency spending overseas is figured in by the budget office, estimated outlays for this year actually increase by over $3 billion.
The agreement does put the brakes on what had been a steady growth in spending by federal agencies. Future savings would be greater as the cuts took hold — a point Republican aides emphasized by noting that the plan is estimated to cut spending by $312 billion over the next decade.
Link (http://www.nytimes.com/2011/04/14/us/politics/14congress.html?_r=2&hp)
jayducharme
Apr 24, 02:52 PM
I just checked my current desktop pictures folder. The images are 2560x1600, and they're only about 1 mb each. So it's really not much more of a leap to get to 3200.
Tyrion
Apr 20, 12:48 PM
I think it does. Obviously, so did others.
Sigh. What is this, people? A full moon or something?
I never once told anyone to shut up. I never once told anyone what they could and couldn't discuss. I merely mentioned that the attitude of a few members here - as exemplified by the post I originally quoted, which postulated that "we all have a 2-year contract" - is arrogant and incredibly US-centric. A large portion of iPhone users is not caught up in 2-year contracts. No one I know who owns an iPhone is tied up in a 2-year contract. And why would they be? After all, a new iPhone is released every year, not every two years. So, a large portion of iPhone users follow a different upgrade cycle than US-based iPhone users, and I merely want this particular view to be represented in this dicussion. I for one am pretty screwed if the next iPhone is only released in September, because by then my 12-month contract will have been renewed and I won't be able to get a rebate on a new device.
Sigh. What is this, people? A full moon or something?
I never once told anyone to shut up. I never once told anyone what they could and couldn't discuss. I merely mentioned that the attitude of a few members here - as exemplified by the post I originally quoted, which postulated that "we all have a 2-year contract" - is arrogant and incredibly US-centric. A large portion of iPhone users is not caught up in 2-year contracts. No one I know who owns an iPhone is tied up in a 2-year contract. And why would they be? After all, a new iPhone is released every year, not every two years. So, a large portion of iPhone users follow a different upgrade cycle than US-based iPhone users, and I merely want this particular view to be represented in this dicussion. I for one am pretty screwed if the next iPhone is only released in September, because by then my 12-month contract will have been renewed and I won't be able to get a rebate on a new device.
Doctor Q
Mar 29, 08:05 PM
If the mp3s have track information embedded in them, they maintain correct order when you upload them. Songs you've downloaded from iTunes should be fine. If it's stuff you stole from somewhere else, who knows who encoded it or what settings they used.
OK, thanks, that's good news. In this case it's tracks from a CD I own, but since I rarely buy CDs any more this will be less and less of a problem!
OK, thanks, that's good news. In this case it's tracks from a CD I own, but since I rarely buy CDs any more this will be less and less of a problem!
adbe
Mar 29, 02:37 PM
I wasn't aware that other countries looked down on products manufactured here, that's a shame.
Most don't, but for the average Whereverian, two questions spring to mind when seeing a US flag on the side of the box:
1) shouldn't I really be buying stuff made right here in Wherever?
2) Alright, so the case was screwed together in the US, but isn't this still just Chinese engineering at its finest[1]?
At least Apple, with their 'Designed in California' motto, are being honest.
[1] Case in point, since someone already mentioned them, Chrysler. Their chassis were largely warmed over obsolete MB tech. Half their 'made in the US' line isn't. And, like just about everyone else in the industry, the lion's share of components in those cars came from global supply lines. It's remarkable given how much Chrysler had to do with things that they could still f-ck it up. :(
Most don't, but for the average Whereverian, two questions spring to mind when seeing a US flag on the side of the box:
1) shouldn't I really be buying stuff made right here in Wherever?
2) Alright, so the case was screwed together in the US, but isn't this still just Chinese engineering at its finest[1]?
At least Apple, with their 'Designed in California' motto, are being honest.
[1] Case in point, since someone already mentioned them, Chrysler. Their chassis were largely warmed over obsolete MB tech. Half their 'made in the US' line isn't. And, like just about everyone else in the industry, the lion's share of components in those cars came from global supply lines. It's remarkable given how much Chrysler had to do with things that they could still f-ck it up. :(
fivetoadsloth
Apr 10, 05:59 PM
Math is a language we engineers, scientists, economists, etc... are fluent in.
To us this is not-ideal delivery method, but it has a definite meaning.
Looking at the thread, I think there is a clear dividing line. Native math speakers: scientists, engineers, programmers, etc... say 288. Others who are effectively non-native speakers may interpret 2 due to their lack of fluency.
B
My grammar may be terrible, but I dare say that I can do math. I do lots of it. The divide balamw mentioned really does seem to exist, and is a little disappointing.
Pretty much
You get 288 if you know what you are doing and do not make the necessary assumptions that you have to make in order to get 2
When your job relies on solving equations and manipulating them, you can bet it does as far as understanding the fundamentals of solving equations
Yes. Again, from the posts I have seen those that never really stopped using math all agree: 288 is the correct answer in the presented form. Ideally such an equation would be presented either with very clear parenthesis/multiplication signs or typeset in LaTeX or similar.
To us this is not-ideal delivery method, but it has a definite meaning.
Looking at the thread, I think there is a clear dividing line. Native math speakers: scientists, engineers, programmers, etc... say 288. Others who are effectively non-native speakers may interpret 2 due to their lack of fluency.
B
My grammar may be terrible, but I dare say that I can do math. I do lots of it. The divide balamw mentioned really does seem to exist, and is a little disappointing.
Pretty much
You get 288 if you know what you are doing and do not make the necessary assumptions that you have to make in order to get 2
When your job relies on solving equations and manipulating them, you can bet it does as far as understanding the fundamentals of solving equations
Yes. Again, from the posts I have seen those that never really stopped using math all agree: 288 is the correct answer in the presented form. Ideally such an equation would be presented either with very clear parenthesis/multiplication signs or typeset in LaTeX or similar.
�algiris
May 4, 03:56 PM
Many countries have caps. US, Canada, Australia.
Many is not all. Let's not assume.
Many is not all. Let's not assume.
Jett0516
Mar 28, 12:38 PM
I think the reason why there is no new iphone this year is because maybe apple wants to come out with both at&t and verizone iphone at the same time next year. which would be less of a headache for both carrier and fans.
LeighAnna Jones
Mar 29, 04:13 PM
Thousands of people are dying in Japan and all you idiots care about is iPod Touch batteries? That's kind of... selfish.
paradox00
May 4, 04:44 PM
Just preferred?
That only means an Option right? Still going to be DVD/USB Stick?
Because if it was App Store only, what about people with Leopard or earlier?
The article's not that long of a read.
That only means an Option right? Still going to be DVD/USB Stick?
Because if it was App Store only, what about people with Leopard or earlier?
The article's not that long of a read.
wordoflife
Mar 28, 09:56 AM
On second thought, I don't believe it. I think someone was just over analyzing this.
MikeTheC
Nov 25, 09:49 PM
To illustrate your point, PalmOne (if that's what the PalmOS Group is called this month...) is doing the aforemnetioned ground-up rewrite of PalmOS now (it should be available to devs soon if they're on schedule) and it's based on Linux. Stable, massively featureful, full PalmOS 5 backward-compatibility, and futureproof.
Yet the hardware arm of Palm has said it might not buy the new sytem from the software arm. I have to imagine this has to do with posturing/playing the good little beoch to Microsoft. We know what happens to companies which partner with Microsoft... that they have proves prima facia that they're unequipped to run a company.
I hate to keep dragging my personal employment history into the discussion here, but this is *hardly* the first time this kind of factor has been in play.
I worked for what was, until (talk about timing!) April 1st of this year, a fully-Sony-staffed technical support facility. We provided tech support for Sony computers, monitors, CLIÉ PDAs, WebTV, Satellite tv, TVs, DVD players, VCRs, phones, all the Business and Professional stuff, etc. Yet (with the exception of B&P), our facility competed for tech-supporting our products with other tech support agencies out there, including our own out-sourced tech support partners.
Sony frequently would not include their own subsystems (CD-ROMs, DVD-ROMs, writers, etc.) in their own products because they wouldn't (some say "couldn't" but I don't buy that) let themselves have their own inventory cheap enough in a lot of cases. Heck, for that matter, it wasn't until sometime in early 2004 (basically 1 year and change before we all got kicked out) that they switched from 500MHz P3-based Hewlett-Packard desktop computers as our actual "agent workstations" to 3.2GHz P4-based VAIOs. For that matter (and yes this is a rant, but it's also pertinent to this aspect of the discussion) it wasn't until like the last year-and-a-half, maybe not-quite-two-years of our operations that they managed to get more than a handful of current-model Sony computer products into the building AND into the hands of those of us doing the tech support. (The reason for this largely relates to the fact that we as the "tech support" division were the red-headed step-child, and basically a money pit, and we had to actually *buy* our own products at regular retail prices from our manufacturing divisions, instead of them sending them to us.) Now, make of that what you will.
I go into this to basically say that it doesn't surprise me to see any company playing the "house divided" strategy. The only problem is that it is a losing strategy. Whether religious or not, people should at least look *this* up in the Bible as a basic, common sense 101 lesson on how not to run your personal life or your business. Ah, but I digress...
Yet the hardware arm of Palm has said it might not buy the new sytem from the software arm. I have to imagine this has to do with posturing/playing the good little beoch to Microsoft. We know what happens to companies which partner with Microsoft... that they have proves prima facia that they're unequipped to run a company.
I hate to keep dragging my personal employment history into the discussion here, but this is *hardly* the first time this kind of factor has been in play.
I worked for what was, until (talk about timing!) April 1st of this year, a fully-Sony-staffed technical support facility. We provided tech support for Sony computers, monitors, CLIÉ PDAs, WebTV, Satellite tv, TVs, DVD players, VCRs, phones, all the Business and Professional stuff, etc. Yet (with the exception of B&P), our facility competed for tech-supporting our products with other tech support agencies out there, including our own out-sourced tech support partners.
Sony frequently would not include their own subsystems (CD-ROMs, DVD-ROMs, writers, etc.) in their own products because they wouldn't (some say "couldn't" but I don't buy that) let themselves have their own inventory cheap enough in a lot of cases. Heck, for that matter, it wasn't until sometime in early 2004 (basically 1 year and change before we all got kicked out) that they switched from 500MHz P3-based Hewlett-Packard desktop computers as our actual "agent workstations" to 3.2GHz P4-based VAIOs. For that matter (and yes this is a rant, but it's also pertinent to this aspect of the discussion) it wasn't until like the last year-and-a-half, maybe not-quite-two-years of our operations that they managed to get more than a handful of current-model Sony computer products into the building AND into the hands of those of us doing the tech support. (The reason for this largely relates to the fact that we as the "tech support" division were the red-headed step-child, and basically a money pit, and we had to actually *buy* our own products at regular retail prices from our manufacturing divisions, instead of them sending them to us.) Now, make of that what you will.
I go into this to basically say that it doesn't surprise me to see any company playing the "house divided" strategy. The only problem is that it is a losing strategy. Whether religious or not, people should at least look *this* up in the Bible as a basic, common sense 101 lesson on how not to run your personal life or your business. Ah, but I digress...
emotion
Aug 11, 10:22 AM
Well i know i can get the chip, but then don't i need a new motherboard too, and who/where would i get that put in?
No, the same chipset is used for Merom at this stage (Santa Rosa won't be around until next year). I think a firmware update might be needed but possibly not. Those Core Solo Mac Minis look good to me for a makeover.
No, the same chipset is used for Merom at this stage (Santa Rosa won't be around until next year). I think a firmware update might be needed but possibly not. Those Core Solo Mac Minis look good to me for a makeover.
dgree03
Mar 29, 09:13 AM
There are several streaming and file store apps in app store...
how many of those apps sell music and movies for use on portable devices?
So why is the website blocking access?
That being said, I hope Apple's preview of the future of iOS gets done with all the restrictions after all. Fighting with companies who want to build on your platform is not gonna lead them anywhere.
I didnt realize the webpage was blocking access...
how many of those apps sell music and movies for use on portable devices?
So why is the website blocking access?
That being said, I hope Apple's preview of the future of iOS gets done with all the restrictions after all. Fighting with companies who want to build on your platform is not gonna lead them anywhere.
I didnt realize the webpage was blocking access...
WildGuess
Apr 7, 09:31 AM
They can have my screen. It only bleeds on the edges. Still enough real estate for a seven inch model.
TequilaBoobs
Nov 25, 09:19 PM
i hope apple comes out with a shoe phone, something the pink panther or inspector gadget would use.
kavika411
Mar 29, 08:43 AM
I'm glad Amazon rolled this out before Apple in the sense that I hope it pushes Apple to roll out a cloud subscription that handily beats Amazon's offering.
RalfTheDog
Apr 7, 11:28 AM
I can't believe the number of positive votes and gloaters we have in here. Aren't you the same people who are outraged because you can't get your iPad 2 because the scalpers bought them all up?
Look, if Apple dominates the tablet market because the iPad is genuinely better than the other guy's tablet (and don't get me wrong, I think it is) and that causes Apple's sales to far eclipse everyone else, then GREAT! People vote with their wallets and the dominant winner is clear. But if Apple becomes the dominant player because, heck, they're so big that they can simply BUY THEIR WAY to the top, then that's not really fair for anybody, is it?
Isn't that how Windows got their market share? Because Microsoft got so big that they could start dictating deals to the PC makers? Didn't we bash them for "forcing" Windows on consumers, not giving them a fair choice?
scalpers nothing, it was customers. People want the iPad.
They only need like ~100,000.
RIM is no Google. I can't picture them using more than 10,000 in the same time frame
Look, if Apple dominates the tablet market because the iPad is genuinely better than the other guy's tablet (and don't get me wrong, I think it is) and that causes Apple's sales to far eclipse everyone else, then GREAT! People vote with their wallets and the dominant winner is clear. But if Apple becomes the dominant player because, heck, they're so big that they can simply BUY THEIR WAY to the top, then that's not really fair for anybody, is it?
Isn't that how Windows got their market share? Because Microsoft got so big that they could start dictating deals to the PC makers? Didn't we bash them for "forcing" Windows on consumers, not giving them a fair choice?
scalpers nothing, it was customers. People want the iPad.
They only need like ~100,000.
RIM is no Google. I can't picture them using more than 10,000 in the same time frame
0010101
Nov 25, 10:30 AM
I know LG makes an MP3 player.. when I said Apple has about as much of a chance entering the cell phone market as LG has entering the MP3 market, what I was referring to is POPULARITY and MARKET SHARE.
When I said Apple doesn't have a history of 'working well with others', I was referring to other companies.
You don't just wake up one day and start selling phones.. there are a whole lot of other companies involved.. most importantly, a cell phone service provider. One who is willing to pay Apples per unit price and give the phone away for next to nothing in exchange for an end customer contract.
That's how the majority of cell phones are sold.. not walking into target and plunking down $250 and it's yours.. but signing a contract for a year or more and getting the phone at a significantly reduced rate, or even 'free'.
In order to be successful in the cell phone market, you need to have more than one cell service provider on board, willing to push your phones, and you have to do it at a price point thats comfortable for both the manufacturer of the phone, and the guy selling the phone.
Then in order to do that, you have to offer that particular provider something special.. like a special model available only at that particular provider. Which means Apple would have to either stick with a single carrier, or have multiple models.
Then finally, you have the convergence factor. I know a lot of people with cell phones. I know a lot of people with PDA's. I know a lot of people with MP3 players.
I don't know a lot of people who want all three devices wrapped up into one unit.
An iPod with the ability (but not a requirement) to connect to cellular networks to download content, I can see and think would be a hit.
Being able to add OPTIONAL, basic phone functions and texting to such a unit for those interested in such a thing, not bad.
But a full blown 'iPhone'? Big mistake.
When I said Apple doesn't have a history of 'working well with others', I was referring to other companies.
You don't just wake up one day and start selling phones.. there are a whole lot of other companies involved.. most importantly, a cell phone service provider. One who is willing to pay Apples per unit price and give the phone away for next to nothing in exchange for an end customer contract.
That's how the majority of cell phones are sold.. not walking into target and plunking down $250 and it's yours.. but signing a contract for a year or more and getting the phone at a significantly reduced rate, or even 'free'.
In order to be successful in the cell phone market, you need to have more than one cell service provider on board, willing to push your phones, and you have to do it at a price point thats comfortable for both the manufacturer of the phone, and the guy selling the phone.
Then in order to do that, you have to offer that particular provider something special.. like a special model available only at that particular provider. Which means Apple would have to either stick with a single carrier, or have multiple models.
Then finally, you have the convergence factor. I know a lot of people with cell phones. I know a lot of people with PDA's. I know a lot of people with MP3 players.
I don't know a lot of people who want all three devices wrapped up into one unit.
An iPod with the ability (but not a requirement) to connect to cellular networks to download content, I can see and think would be a hit.
Being able to add OPTIONAL, basic phone functions and texting to such a unit for those interested in such a thing, not bad.
But a full blown 'iPhone'? Big mistake.
Pressure
Sep 16, 10:01 AM
Thanks for the condescending tone in response to an off-the-cuff "would be nice" comment -- it makes you look such a man.
Of course, given the Go 7700 is effectively an 80nm 7600 -- and therefore should use less power -- I'd say it was realistic to suggest it be used.
Well done.
I meant Geforce GO7800, a mistake on my part.
Of course, given the Go 7700 is effectively an 80nm 7600 -- and therefore should use less power -- I'd say it was realistic to suggest it be used.
Well done.
I meant Geforce GO7800, a mistake on my part.
0 comments:
Post a Comment